Ozi Explorer 最新3.95.4m正式版＋简体中文语言包＋注册码＋最新3.96.2a开发人员版

Release Version 3.95.4m (May-2006)
Fixes

NASA changed the web page links to the SRTM height data, these links on the OziExplorer 3D/Elevation menu have been fixed.
Changes

Added support for the D801 PVT mode for the new Garmin "x" series GPS receivers.
Added the Garmin Edge to the list of Garmin GPS receivers in configuration.
Added support for the Garmin Edge track download (D304 data type). Track upload is not supported in this model.
Added support for additional ozfx3 image format types.





点击这里下载
ftp://ksyz:ksyz@218.4.148.235/f:/ftp/ozi pc版3.95.4m＋简体中文语言包＋注册码＋3.96.2a开发人员版.rar

Development Version 3.96.2a (February-2006)
Fixes

Fixed problem with configuration
GPS symbols were not correct
Moving Map Pointer was not correct
Numerous other fixes have been done.
Changes

Tracks
There has been a change to the way tracks can be used, there is now the concept of an Active Track. In the previous version all track points for all tracks could be active at the same time, this made it difficult to select the exact point wanted when tracks overlaid each other. Now certain operations can only be done on the Active Track.

When the Track Control is not open the Active Track is always Track 1.
When the Track Control is open the Active Track is the track highlighted in the Track Control List.
The Active Track will always plot on top of all other tracks.
Track Points can be added, deleted, selected ... for the Active Track.
The Active Track can have track points active and displayed in a different color, the button is on the Track Control toolbar.
Uploading to a GPS still always uses Track 1 and downloading still uses Track 1 (+2,3 depending on how many tracks are downloaded).
There are other operations which still work only with track 1.
Points (not waypoints)
Operate the same as Tracks (where applicable) and the Active Point Set is the Point Set highlighted in the Point Control.

Support for the Ship Automatic Identification System (AIS) has been added, ships sending AIS information will be plotted on a map displayed in OziExplorer. The option for AIS is on the Moving Map Menu, this allows you to view a list of the ships sending AIS and also to configure the AIS com port. AIS data can be supplied on the same com port as the GPS NMEA data or on a separate com port. If AIS is marked as Active (in AIS configuration) then it is automatically started when Moving Map is started. There are still a lot of work needed in OziExplorer to the AIS system but it should work well enough to test. A button for the AIS control can be manually added to the User Toolbar. For my testing I have been using the Nasa Marine AIS Engine.
The Route Editor can now be resized, the size of the 2 lists on the form can be adjusted and the column widths of the 2 lists can be adjusted.

[ 本帖最后由 BjCat 于 2006-6-17 08:56 PM 编辑 ]

能查看“实时交通路况”的地图 | 3维地图 | 实景地图| 卫星地图 | 2维地图 大收集